IB-Tool1.5.0 - App Store
Sie können Ergebnisse sehen in einige Sekunden.
Herausgeberbeschreibung
ACHTUNG - Das IB-Tool funktioniert nur in Verbindung mit einem Gateway zur Lichtsteueranlage, welches die Befehle in die LUXMATE-Welt übersetzt. Ohne dieses Gateway ist das IB-Tool nicht verwendbar!
Beschreibung:
Das Zumtobel IB-Tool ist das perfekte Werkzeug zur Grundinbetriebnahme Ihrer Lichtlösung. Mit dieser einfach zu bedienenden App kann Ihre Zumtobel-Lichtlösung schnell, einfach und sicher konfiguriert werden. Es ermöglicht die einfache und kabellose Adressierung aller im Gebäude vorhandenen LUXMATE-Ausgänge und die Zuordnung von Bediengeräten zu den Ausgängen. Es ist somit das Inbetriebnahmewerkzeug für den Anlagenbetreuer und Servicetechniker.
Die gesamte Adressierung bzw. die gesamte Anlage kann auf Knopfdruck hinsichtlich Funktionsfähigkeit und korrekter Installation überprüft werden. Das IB-Tool bietet zudem die Möglichkeit alle Aktoren zu bedienen und deren Stimmungseinstellungen permanent zu speichern.
Weiters bietet das IB-Tool eine Anzahl an ausgesuchten Statusinformationen, die den gesamten Inbetriebnahmevorgang beschleunigen und übersichtlicher machen.
Das App ist für das iPhone optimiert um größtmögliche Flexibilität und Bewegungsfreiheit zu gewährleisten. Sie können sich während des Inbetriebnahmevorgangs frei im Gebäude bewegen und haben so immer den bestmöglichen und mobilen Zugriff auf Ihr Lichtsteuersystem.
Das IB-Tool ist mit folgenden Zumtobel/LUXMATE Systemen kompatibel:
• LUXMATE Comfort Anlagen
• PROFESSIONAL LRA
• LITENET
• LITECOM
Funktionen des IB-Tools im Überblick (Auszug):
• Lokalisieren der Aktoren/Bediengeräte/Sensoren
• Adressieren der Aktoren/Bediengeräte/Sensoren
• Überprüfen der gesamten Installation
• Überprüfen der Adressierungsstruktur
• Ändern/Löschen von Adressen
• Konfiguration von Stellwerten für Aktoren
• Bedienung aller Aktoren (Schalten, Dimmen)
• Schnellübersicht über die komplette Anlage
• Integrierte Hilfe
Über IB-Tool
Das Unternehmen, das IB-Tool entwickelt, ist Zumtobel Lighting GmbH. Die neueste vom Entwickler veröffentlichte Version ist 1.5.0.
Um IB-Tool auf Ihrem iOS-Gerät zu installieren, klicken Sie einfach auf die grüne Schaltfläche Weiter zur App oben, um den Installationsvorgang zu starten. Die App ist seit 2026-09-17 auf unserer Website gelistet und wurde 0 Mal heruntergeladen. Wir haben bereits geprüft, ob der Download-Link sicher ist; zu Ihrem eigenen Schutz empfehlen wir jedoch, die heruntergeladene App mit Ihrem Antivirusprogramm zu scannen. Ihr Antivirusprogramm kann IB-Tool als Malware erkennen, wenn der Download-Link defekt ist.
So installieren Sie IB-Tool auf Ihrem iOS-Gerät:
- Klicken Sie auf unserer Website auf die Schaltfläche Weiter zur App. Dadurch werden Sie zum App Store weitergeleitet.
- Sobald IB-Tool im iTunes-Eintrag Ihres iOS-Geräts angezeigt wird, können Sie den Download und die Installation starten. Tippen Sie rechts neben der App auf die Schaltfläche LADEN, um den Download zu starten.
- Wenn Sie nicht in der iOS App Store App angemeldet sind, werden Sie nach Ihrer Apple-ID und/oder Ihrem Passwort gefragt.
- Nachdem IB-Tool heruntergeladen wurde, sehen Sie rechts einen INSTALLIEREN-Button. Tippen Sie darauf, um die eigentliche Installation der iOS-App zu starten.
- Sobald die Installation abgeschlossen ist, können Sie auf die Schaltfläche ÖFFNEN tippen, um sie zu starten. Das Symbol wird außerdem zum Startbildschirm Ihres Geräts hinzugefügt.
Programmdetails
Systemanforderungen
Download-Informationen
Preisgestaltung
Versionsgeschichte
Version 1.5.0
veröffentlicht am 2026-09-17
* Aktualisierung der Bibliotheken
* Anpassung an Zumtobel Farbschema
Version 1.5.0
veröffentlicht am 2026-10-14
Version History * Dependencies update
* UI rebranding to Zumtobel branding 1.5.0 Sep 17 Image:
•ZGS – Branding
•iPad/iPhone X adaptation
Bug fixing:
•Fixed bug with sensor addressing
•Improving stability
Overview *New*:
•Extended Icon Database (RUK, Emergency Lights, sensors)
•Detail-View Rooms:
•Switch and delete groups
•Call and save scenes
•Change Values
•Delete
•Detail-View Actuators:
•Show production number
•Error Messages
•Re-Addressing
•Delete 1.4.0 04/09/2018 Some Bugfixes 1.3.1 02/19/2018 New functions and changes in version 1.3.0
NEW FUNCTIONS
- App is compatible with iOS 11.
- It is possible to address ED-SENS mini and ED-1AWSD (passive addressing).
CHANGES
- In order to go to the device details and to delete a device, press and hold the desired item in the overview list (instead of swiping).
- Further small adjustments and bug fixes. 1.3.0 10/25/2017 NEW
- iOS8 compatible
- Recently used Gateways are displayed and can be selected directly.
- Mode of operation filters show only available modes and the number of available devices.
- For the overview a header for each room was added to operate the whole room at once.
- For addressing of outputs it is now possible to filter the mode of operation before addressing.
CHANGES
- Improved Date/Time-settings
- Various improvements regarding addressing
BUG FIXES
- Bug within addressing of input devices outside of the selected room was corrected.
...other small adjustments and bug fixes. 1.2.0 10/24/2014 NEW FEATURES
• You are now able to directly delete addresses in "Overview"
• In "Addressing" now you have options to "Abort", "Restart" or "Continue"
• On App launch the date & time will be retrieved immediatly
CHANGES
• Common: delete will always use LOE_R_RGB_MINOR, LOE_G_RGB_MINOR and LOE_B_RGB_MINOR commands
• Common: layout adapted for use on iPhone 4/4S
• Configuration: the gateway name will be also shown in status overview if it's a LITECOM CCD
BUGFIXES
• Addressing: very fast addressing rate no more crashes the app
• Addressing: addressing the last item of all skipped modules no more crashes the app
• Addressing: sending correct INIT-Mode in case of sensor addressing with type INTENS
• Common: in presence of an interval timer (LM-ZSQ) there are no more infinite polling loops
• Configuration: setting a desired scene will always use the type 0x01 (COMMON)
• Configuration: fast swipe gestures through the actuators in "Change" mode will no more lag the PNR retrieval
• Configuration: on "Group - Check - Limits" the ON/OFF switch now will send the correct group if an actuator has been directly selected (no swipe!)
• Configuration: the app will no more crash on delete of room 0
• Configuration: you can now set scenes on groups 1.1.0 04/17/2014 1.0.0 02/18/2014
Version 1.5.0
veröffentlicht am 2026-09-19
Version History * Dependencies update
* UI rebranding to Zumtobel branding 1.5.0 1d ago Image:
•ZGS – Branding
•iPad/iPhone X adaptation
Bug fixing:
•Fixed bug with sensor addressing
•Improving stability
Overview *New*:
•Extended Icon Database (RUK, Emergency Lights, sensors)
•Detail-View Rooms:
•Switch and delete groups
•Call and save scenes
•Change Values
•Delete
•Detail-View Actuators:
•Show production number
•Error Messages
•Re-Addressing
•Delete 1.4.0 04/09/2018 Some Bugfixes 1.3.1 02/19/2018 New functions and changes in version 1.3.0
NEW FUNCTIONS
- App is compatible with iOS 11.
- It is possible to address ED-SENS mini and ED-1AWSD (passive addressing).
CHANGES
- In order to go to the device details and to delete a device, press and hold the desired item in the overview list (instead of swiping).
- Further small adjustments and bug fixes. 1.3.0 10/25/2017 NEW
- iOS8 compatible
- Recently used Gateways are displayed and can be selected directly.
- Mode of operation filters show only available modes and the number of available devices.
- For the overview a header for each room was added to operate the whole room at once.
- For addressing of outputs it is now possible to filter the mode of operation before addressing.
CHANGES
- Improved Date/Time-settings
- Various improvements regarding addressing
BUG FIXES
- Bug within addressing of input devices outside of the selected room was corrected.
...other small adjustments and bug fixes. 1.2.0 10/24/2014 NEW FEATURES
• You are now able to directly delete addresses in "Overview"
• In "Addressing" now you have options to "Abort", "Restart" or "Continue"
• On App launch the date & time will be retrieved immediatly
CHANGES
• Common: delete will always use LOE_R_RGB_MINOR, LOE_G_RGB_MINOR and LOE_B_RGB_MINOR commands
• Common: layout adapted for use on iPhone 4/4S
• Configuration: the gateway name will be also shown in status overview if it's a LITECOM CCD
BUGFIXES
• Addressing: very fast addressing rate no more crashes the app
• Addressing: addressing the last item of all skipped modules no more crashes the app
• Addressing: sending correct INIT-Mode in case of sensor addressing with type INTENS
• Common: in presence of an interval timer (LM-ZSQ) there are no more infinite polling loops
• Configuration: setting a desired scene will always use the type 0x01 (COMMON)
• Configuration: fast swipe gestures through the actuators in "Change" mode will no more lag the PNR retrieval
• Configuration: on "Group - Check - Limits" the ON/OFF switch now will send the correct group if an actuator has been directly selected (no swipe!)
• Configuration: the app will no more crash on delete of room 0
• Configuration: you can now set scenes on groups 1.1.0 04/17/2014 1.0.0 02/18/2014
Version 1.4.0
veröffentlicht am 2026-09-12
Version History Image:
•ZGS – Branding
•iPad/iPhone X adaptation
Bug fixing:
•Fixed bug with sensor addressing
•Improving stability
Overview *New*:
•Extended Icon Database (RUK, Emergency Lights, sensors)
•Detail-View Rooms:
•Switch and delete groups
•Call and save scenes
•Change Values
•Delete
•Detail-View Actuators:
•Show production number
•Error Messages
•Re-Addressing
•Delete 1.4.0 04/09/2018 Some Bugfixes 1.3.1 02/19/2018 New functions and changes in version 1.3.0
NEW FUNCTIONS
- App is compatible with iOS 11.
- It is possible to address ED-SENS mini and ED-1AWSD (passive addressing).
CHANGES
- In order to go to the device details and to delete a device, press and hold the desired item in the overview list (instead of swiping).
- Further small adjustments and bug fixes. 1.3.0 10/25/2017 NEW
- iOS8 compatible
- Recently used Gateways are displayed and can be selected directly.
- Mode of operation filters show only available modes and the number of available devices.
- For the overview a header for each room was added to operate the whole room at once.
- For addressing of outputs it is now possible to filter the mode of operation before addressing.
CHANGES
- Improved Date/Time-settings
- Various improvements regarding addressing
BUG FIXES
- Bug within addressing of input devices outside of the selected room was corrected.
...other small adjustments and bug fixes. 1.2.0 10/24/2014 NEW FEATURES
• You are now able to directly delete addresses in "Overview"
• In "Addressing" now you have options to "Abort", "Restart" or "Continue"
• On App launch the date & time will be retrieved immediatly
CHANGES
• Common: delete will always use LOE_R_RGB_MINOR, LOE_G_RGB_MINOR and LOE_B_RGB_MINOR commands
• Common: layout adapted for use on iPhone 4/4S
• Configuration: the gateway name will be also shown in status overview if it's a LITECOM CCD
BUGFIXES
• Addressing: very fast addressing rate no more crashes the app
• Addressing: addressing the last item of all skipped modules no more crashes the app
• Addressing: sending correct INIT-Mode in case of sensor addressing with type INTENS
• Common: in presence of an interval timer (LM-ZSQ) there are no more infinite polling loops
• Configuration: setting a desired scene will always use the type 0x01 (COMMON)
• Configuration: fast swipe gestures through the actuators in "Change" mode will no more lag the PNR retrieval
• Configuration: on "Group - Check - Limits" the ON/OFF switch now will send the correct group if an actuator has been directly selected (no swipe!)
• Configuration: the app will no more crash on delete of room 0
• Configuration: you can now set scenes on groups 1.1.0 04/17/2014 1.0.0 02/18/2014
Version 1.4.0
veröffentlicht am 2026-09-05
Version History This app has been updated by Apple to prepare for watchOS 27 compatibility. No new features are included.
Image:
•ZGS – Branding
•iPad/iPhone X adaptation
Bug fixing:
•Fixed bug with sensor addressing
•Improving stability
Overview *New*:
•Extended Icon Database (RUK, Emergency Lights, sensors)
•Detail-View Rooms:
•Switch and delete groups
•Call and save scenes
•Change Values
•Delete
•Detail-View Actuators:
•Show production number
•Error Messages
•Re-Addressing
•Delete 1.4.0 04/09/2018 Some Bugfixes 1.3.1 02/19/2018 New functions and changes in version 1.3.0
NEW FUNCTIONS
- App is compatible with iOS 11.
- It is possible to address ED-SENS mini and ED-1AWSD (passive addressing).
CHANGES
- In order to go to the device details and to delete a device, press and hold the desired item in the overview list (instead of swiping).
- Further small adjustments and bug fixes. 1.3.0 10/25/2017 NEW
- iOS8 compatible
- Recently used Gateways are displayed and can be selected directly.
- Mode of operation filters show only available modes and the number of available devices.
- For the overview a header for each room was added to operate the whole room at once.
- For addressing of outputs it is now possible to filter the mode of operation before addressing.
CHANGES
- Improved Date/Time-settings
- Various improvements regarding addressing
BUG FIXES
- Bug within addressing of input devices outside of the selected room was corrected.
...other small adjustments and bug fixes. 1.2.0 10/24/2014 NEW FEATURES
• You are now able to directly delete addresses in "Overview"
• In "Addressing" now you have options to "Abort", "Restart" or "Continue"
• On App launch the date & time will be retrieved immediatly
CHANGES
• Common: delete will always use LOE_R_RGB_MINOR, LOE_G_RGB_MINOR and LOE_B_RGB_MINOR commands
• Common: layout adapted for use on iPhone 4/4S
• Configuration: the gateway name will be also shown in status overview if it's a LITECOM CCD
BUGFIXES
• Addressing: very fast addressing rate no more crashes the app
• Addressing: addressing the last item of all skipped modules no more crashes the app
• Addressing: sending correct INIT-Mode in case of sensor addressing with type INTENS
• Common: in presence of an interval timer (LM-ZSQ) there are no more infinite polling loops
• Configuration: setting a desired scene will always use the type 0x01 (COMMON)
• Configuration: fast swipe gestures through the actuators in "Change" mode will no more lag the PNR retrieval
• Configuration: on "Group - Check - Limits" the ON/OFF switch now will send the correct group if an actuator has been directly selected (no swipe!)
• Configuration: the app will no more crash on delete of room 0
• Configuration: you can now set scenes on groups 1.1.0 04/17/2014 1.0.0 02/18/2014
Version 1.4.0
veröffentlicht am 2026-08-28
Version History This update from Apple will improve the functionality of this app. No new features are included.
Image:
•ZGS – Branding
•iPad/iPhone X adaptation
Bug fixing:
•Fixed bug with sensor addressing
•Improving stability
Overview *New*:
•Extended Icon Database (RUK, Emergency Lights, sensors)
•Detail-View Rooms:
•Switch and delete groups
•Call and save scenes
•Change Values
•Delete
•Detail-View Actuators:
•Show production number
•Error Messages
•Re-Addressing
•Delete 1.4.0 04/09/2018 Some Bugfixes 1.3.1 02/19/2018 New functions and changes in version 1.3.0
NEW FUNCTIONS
- App is compatible with iOS 11.
- It is possible to address ED-SENS mini and ED-1AWSD (passive addressing).
CHANGES
- In order to go to the device details and to delete a device, press and hold the desired item in the overview list (instead of swiping).
- Further small adjustments and bug fixes. 1.3.0 10/25/2017 NEW
- iOS8 compatible
- Recently used Gateways are displayed and can be selected directly.
- Mode of operation filters show only available modes and the number of available devices.
- For the overview a header for each room was added to operate the whole room at once.
- For addressing of outputs it is now possible to filter the mode of operation before addressing.
CHANGES
- Improved Date/Time-settings
- Various improvements regarding addressing
BUG FIXES
- Bug within addressing of input devices outside of the selected room was corrected.
...other small adjustments and bug fixes. 1.2.0 10/24/2014 NEW FEATURES
• You are now able to directly delete addresses in "Overview"
• In "Addressing" now you have options to "Abort", "Restart" or "Continue"
• On App launch the date & time will be retrieved immediatly
CHANGES
• Common: delete will always use LOE_R_RGB_MINOR, LOE_G_RGB_MINOR and LOE_B_RGB_MINOR commands
• Common: layout adapted for use on iPhone 4/4S
• Configuration: the gateway name will be also shown in status overview if it's a LITECOM CCD
BUGFIXES
• Addressing: very fast addressing rate no more crashes the app
• Addressing: addressing the last item of all skipped modules no more crashes the app
• Addressing: sending correct INIT-Mode in case of sensor addressing with type INTENS
• Common: in presence of an interval timer (LM-ZSQ) there are no more infinite polling loops
• Configuration: setting a desired scene will always use the type 0x01 (COMMON)
• Configuration: fast swipe gestures through the actuators in "Change" mode will no more lag the PNR retrieval
• Configuration: on "Group - Check - Limits" the ON/OFF switch now will send the correct group if an actuator has been directly selected (no swipe!)
• Configuration: the app will no more crash on delete of room 0
• Configuration: you can now set scenes on groups 1.1.0 04/17/2014 1.0.0 02/18/2014
Version 1.4.0
veröffentlicht am 2018-04-09
This app has been updated by Apple to display the Apple Watch app icon.
Image:
•ZGS – Branding
•iPad/iPhone X adaptation
Bug fixing:
•Fixed bug with sensor addressing
•Improving stability
Overview *New*:
•Extended Icon Database (RUK, Emergency Lights, sensors)
•Detail-View Rooms:
•Switch and delete groups
•Call and save scenes
•Change Values
•Delete
•Detail-View Actuators:
•Show production number
•Error Messages
•Re-Addressing
•Delete
Version 1.4.0
veröffentlicht am 2018-04-09
Apr 9, 2018 Version 1.4.0
This app has been updated by Apple to display the Apple Watch app icon.
Image:
•ZGS – Branding
•iPad/iPhone X adaptation
Bug fixing:
•Fixed bug with sensor addressing
•Improving stability
Overview *New*:
•Extended Icon Database (RUK, Emergency Lights, sensors)
•Detail-View Rooms:
•Switch and delete groups
•Call and save scenes
•Change Values
•Delete
•Detail-View Actuators:
•Show production number
•Error Messages
•Re-Addressing
•Delete
Version 1.4.0
veröffentlicht am 2018-04-09
Apr 9, 2018 Version 1.4.0
This app has been updated by Apple to use the latest Apple signing certificate.
Image:
•ZGS – Branding
•iPad/iPhone X adaptation
Bug fixing:
•Fixed bug with sensor addressing
•Improving stability
Overview *New*:
•Extended Icon Database (RUK, Emergency Lights, sensors)
•Detail-View Rooms:
•Switch and delete groups
•Call and save scenes
•Change Values
•Delete
•Detail-View Actuators:
•Show production number
•Error Messages
•Re-Addressing
•Delete
Version 1.4.0
veröffentlicht am 2018-04-09
Apr 9, 2018 Version 1.4.0
Image:
•ZGS – Branding
•iPad/iPhone X adaptation
Bug fixing:
•Fixed bug with sensor addressing
•Improving stability
Overview *New*:
•Extended Icon Database (RUK, Emergency Lights, sensors)
•Detail-View Rooms:
•Switch and delete groups
•Call and save scenes
•Change Values
•Delete
•Detail-View Actuators:
•Show production number
•Error Messages
•Re-Addressing
•Delete
Haftungsausschluss
Offizieller App Store-Link
Wir hosten IB-Tool nicht auf unseren Servern. Wir haben es nicht auf Viren, Adware, Spyware oder andere Arten von Malware gescannt. Diese App wird von Apple gehostet und hat deren Allgemeine Geschäftsbedingungen erfüllt, um dort gelistet zu werden. Wir empfehlen Vorsicht bei der Installation.
Der App-Store-Link für IB-Tool wird Ihnen von apps112.com ohne jegliche Zusicherungen, Gewährleistungen oder Garantien zur Verfügung gestellt, greifen Sie daher auf eigene Gefahr darauf zu.
Bei Fragen zu dieser speziellen App wenden Sie sich bitte direkt an den Herausgeber. Bei Fragen zu den Funktionalitäten von apps112.com kontaktieren Sie uns.



